Osmio Pro 4.5 x 10 Inch Dual Whole House Water Filter System

€180.40
In stock
SKU
4510DPLCB

The system will provide 5 micron nominal sediment protection and complete chlorine reduction using the NSF Certified 5 micron Carbon Block. Please note whole house filter systems are NOT for limescale, please see our softeners section. Whole house systems are usually combined with softeners (either salt or non-salt based) to achieve great results and reverse osmosis point of use system to achieve the complete gold standard of home treatment.

Frequently Bought Together
Total price

The Osmio Pro 4.5 x 10 Inch Dual Whole House Water Filter System is a top of the range Whole House Water Filter System and comes complete with the filters and accessories you need (besides the additional plumbning fittings required). The system will provide 5 micron protection and complete chlorine reduction using the NSF Certified 5 micron Carbon Block.

The system comes complete with two black 4.5 x 10 Inch filter housings with Brass female 1" BSP screw ports - suitable for any pipe type or size up to 1" (15mm, 22mm, 25mm, 28mm). The housings come with a set of screws, a thick high quality metal bracket and housing spanner. We also include a 1" male nipple (plastic) so you can connect the system side by side if you desire. The system can also be arrange in any way that fits your space. The system also comes of course with the two filters

1) Pleated 5m Sediment filter - surface filter reduces any suspended solid to 5 microns. These include sand, particles, rust, silt, lead dust and microplastics.

2) Coconut Carbon Block 5 Micron - with 12,000 Iodine rating our Carbon Block Whole House FIlter is NSF Certified and made from the best indonesian coconut shells.

Both filters are typically changed every 6 months.

The system also protects your water heater, washing machine, refrigerator, ice-maker, and other appliances from the build-up of sediment, dirt, and rust.

The system is put together using the Osmio 4.5" x 10" Dual Housing and uses a 10" Carbon block and 10" Pleated Cartridge.

The system is fitting into the part of the home where the rising main comes into the house, or alternatively at any intersection required (for example if the system way just being used for the kitchen). Below is a quick demonstration of how the system installed (the video shows a 20inch Whole House Water FIltyer System being installed rather than a 10 inch version but the principle is exactly the same).

Download the Osmio Whole House Water Filter Systems Manual

Download this manual which covers the complete installation and maintenance guide for the entire Osmio Whole House FIlter Systems range.

Download Osmio Whole House Filter Systems Manual

How to change the filters on your whole house water filter system

Changing the filters on your whole house system is remarkably easy with no plumber necessary. Watch this short instructional video to see how it done:

More Information
ModelOsmio Pro 4.5 x 10 Inch Dual Whole House Water Filter System
In DepthWhat is in the box:

1 x 10” Full Flow (Blue) 10” housing system (1” BSP ports") & spanner NSF Certified
1 x 4.5 x 10 Carbon block 5 mic NSF Certified
1 x 4.5 x 10 pleated 5 mic NSF Certified

Housing Specification:

Straight thread design on sump EPDM O-ring
Max Pressure: 90 psi (6.3 bar)
Max Temperature: 125°F
Service Flow Rate: up to 35 GPM @ 60 psi
Inlet/Outlet: 1"
Housing Options: Pressure Relief
Dimensions
Height: 14 "
Width: 7-1/4 "
Materials
Cap : Polypropylene
Sump: Styrene Acrylonitrile
Button Assembly 300 series stainless steel, EPDM, Polyproylene
O-Ring: EPDM

Carbon Block:

Thick wall carbon construction for superior performance. Low cost for economy!
Reduces Chlorine/Taste/Odor (CTO) and certain Volatile OrganicChemicals (VOC) from drinking water using coconut base carbons for a sweetertaste.
Very high dirt holding capacity
Zero carbon fines
Virtually zero pressure drop
Specifications:
Micron Rating: 5 Nominal
Dimensions: 10" x 4.5"
Filter Media: Coconut Base Carbon
Netting: Polypropylene
Filter Life: 10,000 Gallons; Recommended filter change every 6 months.

Pressure Loss: To help avoid any potential disappointment with resulting pressure loss, we advise not to install this system if your standing water pressure is lower than 1.5 bar.
Filter ParameterChlorine, Sediments
Write Your Own Review
You're reviewing:Osmio Pro 4.5 x 10 Inch Dual Whole House Water Filter System
Your Rating

Product Questions

Hi, if whole house filter systems are NOT for limescale, is the Osmio Pro 4.5 x 10 Inch Dual Whole House Water Filter System capable of avoiding limescale formation in the heat exchanger of the boiler? I have just changed the heat exchanger in a 2 years old combi boiler, is there any other more suitable system for my problem?
Many thanks,
Fernando
Question by: Fernando Ferrero on 26 May 2021, 14:52
Hi Fernando, in most cases Osmio MiniSoft or MaxiSoft will be a solution to protect your home from limescale damage, Please email us at info@osmiowater.eu we need to know the postcode, number of bathrooms, and occupants to make an accurate recommendation.
https://www.osmiowater.eu/whole-house-water-filters/water-softeners-44/water-softener-alternatives.html
Answer by: Irina Orlenko on 27 May 2021, 23:04